Products
Home > Products > MT29F4G08ABBDAH4-IT:D

MT29F4G08ABBDAH4-IT:D Manufacturers

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of MT29F4G08ABBDAH4-IT:D, We, with great passion and faithfulness, are prepared to present you with best companies and striding forward along with you to create a dazzling upcoming.
MT29F4G08ABBDAH4-IT:D, We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Portugal for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

Related Products

Hot Products

  • EM-888 PCB

    EM-888 PCB

    For example, from the perspective of production process testing, IC testing is generally divided into chip testing, finished product testing, and inspection testing. Unless otherwise required, chip testing generally only conducts DC testing, and finished product testing can have either AC testing or DC testing. In more cases, both tests are available. The following is about EM-888 PCB related, I hope to help you better understand EM-888 PCB.
  • XC5VLX330-2FF1760C

    XC5VLX330-2FF1760C

    XC5VLX330-2FF1760C is suitable for use in a variety of applications, including industrial control, telecommunications, and automotive systems. The device is known for its easy-to-use interface, high efficiency, and thermal performance, making it an ideal choice for a wide range of power management applications.
  • EP4CE15F23C8N

    EP4CE15F23C8N

    ​EP4CE15F23C8N The Cyclone IV E equipment provides -6 (fastest), -7, -8, -8L, and -9L speed levels for commercial equipment, -8L speed level for industrial equipment, and -7 speed level for expanding industrial and automotive equipment. The Cyclone IV GX equipment provides -6 (fastest), -7, and -8 speed levels for commercial equipment and -7 speed levels for industrial equipment.
  • XA6SLX9-2FTG256Q

    XA6SLX9-2FTG256Q

    XA6SLX9-2FTG256Q is suitable for use in a variety of applications, including industrial control, telecommunications, and automotive systems. The device is known for its easy-to-use interface, high efficiency, and thermal performance, making it an ideal choice for a wide range of power management applications.
  • XC5VLX50T-2FFG665C

    XC5VLX50T-2FFG665C

    XC5VLX50T-2FFG665C is a low-cost field-programmable gate array (FPGA) developed by Intel Corporation, a leading semiconductor technology company. This device features 120,000 logic elements and 414 user input/output pins, making it suitable for a wide range of low-power and low-cost applications. It operates on a single power supply voltage ranging from 1.14V to 1.26V and supports various I/O standards such as LVCMOS, LVDS, and PCIe. The device has a maximum operating frequency of up to 415 MHz. The device comes in a small fine pitch ball grid array (FGBA) package with 484 pins, providing high pin-count connectivity for a variety of applications.
  • copper paste filled hole PCB

    copper paste filled hole PCB

    copper paste filled hole PCB: Bai AE3030 copper pulp is a non-conductive DAO copper paste used for the high-density assembly of printed substrate DU plate and the laying of wires.Due to the characteristics of Zhuan "high Thermal conductivity", "bubble-free", "flat" and so on, the copper paste is most suitable for the design of high reliability Pad on Via, stack on Via and Thermal Via. The copper paste is widely used from aerospace satellite, server, cabling machine, LED backlight and so on.
  • Related Blog
  • Reviews

  • Advantages and disadvantages of multilayer boards

    Multilayer boards were invented in 1961. Its production method is generally to make the inner layer graphics first, and then use the printing and etching method to make a single-sided or double-sided substrate, and incorporate it into the designated interlayer, and then heat, press and bond it. As for the subsequent drilling, It is the same as the plated through-hole method of the double-sided board.

  • Why Guangdong's GDP leads the country

    Recently, the GDP data of various provinces, autonomous regions and municipalities across the country have been released one after another. In 2016, Guangdong's economy was generally stable, with a regional GDP of 79.305 billion yuan, an increase of 7.5% year-on-year. The total GDP ranked first in the country for 28 consecutive years.

  • How to design the Rigid-Flex PCB better?

    With the continuous upgrading of electronic products and the gradual application of 5G products, the demand for Rigid-Flex PCB has increased. There is a big difference between designing Rigid-Flex PCB and simply designing Flex-PCB and Rigid-PCB.The following is a detailed description of some requirements for the design of conventionalRigid-Flex PCB.

  • PCB single panel, double panel, multi-layer board can't tell the difference?

    A printed circuit board (PCB) is used to carry electronic components and provide a master circuit for connecting the components to the circuit. From the structural point of view, PCB is divided into single panel, double panel and multilayer board. But most people can't tell the difference, so what are the three differences?

  • Welding process of FPC circuit board

    At present, there are two general FPC welding processes, one is tin press welding, and the other is manual drag welding.

  • PCB production, these matters you must pay attention to!

    People who make circuit boards know that the production process is very complex~

Send Inquiry