12OZ Heavy copper PCB is a layer of copper foil bonded on the glass epoxy substrate of printed circuit board. When the copper thickness is ≥ 2oz, it is defined as Heavy copper PCB. Performance of Heavy copper PCB: 12OZ Heavy copper PCB has the best elongation performance, which is not limited by processing temperature. Oxygen blowing can be used at high melting point, and brittle at low temperature. It is also fireproof and belongs to non combustible material. Even in highly corrosive atmospheric environment, copper board will form a strong, non-toxic passivation protection layer.
Large size sensor PCB--The sensor is a device to detect Du, which can sense the measured information, and can transform it into electrical signal or other required information output according to certain rules, so as to meet the requirements of information transmission, processing, storage, display, recording and control. It needs PCB, Large size sensor PCB to meet these requirements
MEGTRON6 PCB is advanced material designed for high-speed network equipment, mainframes, IC testers and high frequency measuring instruments. The main attributes of MEGTRON6 PCB are: low dielectric constant and dielectric dissipation factors, low transmission loss and high heat resistance; Td = 410°C (770°F). MEGTRON6 PCB meets IPC specification 4101 /102 /91.
Arlon Electronic Materials Co., Ltd. is a well-known high-tech manufacturer, providing various high-tech electronic materials for the global high-tech printed circuit board industry. Arlon USA mainly produces thermosetting products based on polyimide, polymer resin and other high-performance materials, as well as products based on PTFE, ceramic filling and other high-performance materials! Arlon PCB processing and production
Microstrip PCB refers to high-frequency PCB. For special circuit board with high electromagnetic frequency, generally speaking, high frequency board can be defined as frequency above 1GHz. The high frequency board comprises a core plate with a hollow groove and a copper clad plate bonded to the upper surface and the lower surface of the core board through flow glue. The edges of the upper opening and the lower opening of the hollow groove are provided with ribs.
high-speed PCB design circuit boards guide for the design of high-speed circuit boards will be of great help engineers.High-Speed PCB Layout TipsApplication BriefSLOA102 - September 2002High-Speed PCB Layout TipsBruce Carter ABSTRACT High-speed op amp circuit design requires special attention.
