The wide application of advanced intelligent technology, cameras in the fields of transportation, medical treatment, etc ... In view of this situation, this paper improves a wide-angle image distortion correction algorithm. The following is about NELCO Rigid Flex PCB related, I hope to help you better understand NELCO Rigid Flex PCB.
HDI boards are generally manufactured using a lamination method. The more laminations, the higher the technical level of the board. Ordinary HDI boards are basically laminated one time. High-level HDI adopts two or more layered technologies. At the same time, advanced PCB technologies such as stacked holes, electroplated holes, and direct laser drilling are used. The following is about 8 Layer Robot HDI PCB related, I hope to help you better understand 8 Layer Robot HDI PCB.
Signal integrity (SI) issues are becoming a growing concern for digital hardware designers. Due to the increased data rate bandwidth in wireless base stations, wireless network controllers, wired network infrastructure, and military avionics systems, the design of circuit boards has become increasingly complex. The following is about NELCO High Frequency PCB related, I hope to help you better understand NELCO High Frequency PCB.
EM-888 7MM Thick PCB--As user applications require more and more board layers, alignment between layers becomes very important. Alignment between layers requires tolerance convergence. As the board size changes, this convergence requirement is more demanding. All layout processes are generated in a controlled temperature and humidity environment. The following is about EM888 7MM Thick PCB related, I hope to help you better understand EM888 7MM Thick PCB.
Tachyon 100G PCB The exposure equipment is in the same environment. The alignment tolerance of the front and back images of the entire area must be maintained at 0.0125mm. The CCD camera is required to complete the front and rear layout alignment. After etching, the four-hole drilling system was used to perforate the inner layer. The perforation passes through the core board, the position accuracy is maintained at 0.025mm, and the repeatability is 0.0125mm. The following is about Tachyon 100G High-speed PCB related, I hope to help you better understand Tachyon 100G High-speed PCB.
In addition to the requirement for uniform thickness of the plating layer for drilling, backplane designers generally have different requirements for the uniformity of copper on the surface of the outer layer. Some designs etch few signal lines on the outer layer. The following is about Megtron6 step PCB related, I hope to help you better understand Megtron6 step PCB.