HONTEC is one of leading High Frequency Board manufacture, who specializes in high-mix,low volume and quickturn prototype PCB for high-tech industries in 28 countries.
Our High Frequency Board has passed UL, SGS and ISO9001 certification, we are in application of ISO14001 and TS16949 as well.
Located in Shenzhen of GuangDong, HONTEC partners up with UPS, DHL and world-class forwarders to provide efficient shipping services. Welcome to buy High Frequency Board from us. Every request from customers is being replied within 24 hours.
The high-frequency control board is mainly composed of a high-frequency induction heating main control board and two drives. The high-frequency board technology uses SG3525A as a PWM pulse. The output pulse frequency range is 20KHZ-60KHZ, the pulse interval is 180 degrees, and the dead time You can adjust it yourself. The following is about Double sided RO4350B PCB related, I hope to help you better understand Double sided RO4350B PCB.
The Millimeter wave PCB is not too precisely defined. Generally, the electromagnetic wave in the frequency range of 30 to 300 GHz (wavelength is 1 to 10 millimeters) is called millimeter wave. The characteristics of the spectrum. The theory and technology of millimeter wave are the extension of microwave to high frequency and the development of light wave to low frequency, respectively. The following is about Millimeter Wave Radar Antenna PCB related, I hope to help you better understand Millimeter Wave Radar Antenna PCB.
The high-frequency mixed-press printed circuit board includes an aluminum base layer and an insulating and thermally conductive layer. The circuit board is provided with mounting holes. The bottom of the aluminum base layer is bonded and connected to the carbon cladding through a silicon rubber layer. The aluminum base layer, the insulating and thermally conductive layer, and the silicon rubber layer A rubber layer is adhesively connected to the outer end of the carbon cladding, and kraft paper is bonded to the bottom of the carbon cladding, which can prevent moist moisture from contaminating it, avoiding it from being eroded, saving costs, and improving efficiency. The following is about Rogers 4350B PCB related, I hope to help you better understand Rogers 4350B PCB.
With the rapid development of information technology, the trend of high-frequency and high-speed information processing is becoming more and more obvious. The demand for PCBs that can be used at low and high frequencies is increasing. For PCB manufacturers, timely and accurate grasp of market needs and The development trend will make the enterprise invincible. And the finished board has good dimensional stability. The following is about Ro3003 High Frequency PCB related, I hope to help you better understand Ro3003 High Frequency PCB.
High-frequency mixed-press material step board manufacturing technology is a circuit board manufacturing technology that has emerged with the rapid development of the communications and telecommunications industries. It is mainly used to break through the high-speed data and high information content that traditional printed circuit boards cannot reach. The bottleneck of transmission. The following is about AD250 PCB related, I hope to help you better understand AD250 PCB.
For general frequency, use FR-4 sheet, but high-frequency materials should be used in the frequency ratio of 1-5G, such as semi-ceramic materials. ROGERS 4350, 4003, 5880, etc. are commonly used ... If the frequency is higher than 5G, it is best to use PTFE material, which is polytetrafluoroethylene. This material has good high-frequency performance, but there are limitations in the processing arts, such as the surface technology that cannot be hot air leveled. The following is about ISOLA FR408 High Frequency PCB related, I hope to help you better understand ISOLA FR408 High Frequency PCB.
